TSW2828G-PF10 POE SWTICH

TSW2828G-PF10 POE SWTICH
L2 Lite Gigabit Ethernet Access /Aggregation Switch with 4*1G Uplinks

The TSW2812G-PF10 switch is Gigabit Ethernet access switch with eight 1G downlink ports and four 1G uplink ports. The switch support eight POE ports,support 802.3af/at standard. It is also an ideal Gigabit access switch for SMB, enterprise, and campus networks. The TSW2828G-PF10 switch is packed with features that bring high availability, comprehensive security, robust multicast control, and advance QoS to the network edge, while maintaining simple management. 

Key Features

Performance and Scalability
The TSW2828G-PF10 switch is high-performance Gigabit Ethernet L2 Lite managed switch with 56Gbps switching capacity.The switch delivers wire-speed switching performance on all Gigabit ports, taking full advantage of existing high-performance Gigabit CPEs, PCs,11n/ac Wi-Fi Applications etc, significantly improving the responsiveness of applications and file transfer times.
The 4 built-in 1G SFP ports provide uplink flexibility, allowing the insertion of fiber 1G transceivers,to create up to 1Gbps high-speed uplinks to servers or service provider,corporate,or campus networks, reducing bottlenecks and increasing the performance of the access network.
Reliability and Energy Efficiency
The design of the TSW2828G-PF10 switch incorporate high energy efficiency in order to reduce the impact on the environment. 
Robust Multicast Control
IGMP snooping prevents the flooding of multicast traffic by dynamically configuring switch ports so that multicast traffic is forwarded to only those ports associated with an IP multicast receiver. IGMP increases the performance of networks by reducing multicast traffic flooding.
Superior Management
An industry-standard command-line interface (CLI), accessed through the console port or Telnet, provides a familiar user interface and command set for users to manage the switch.
An embedded user-friendly web interface helps users to quickly and simply configure switches.
Continuous Availability
The IEEE 802.1w Rapid Spanning Tree Protocol provides a loop-free network and redundant links to the core network with rapid convergence, to ensure faster recovery from failed links, enhancing overall network stability and reliability.
The IEEE 802.1s Multiple Spanning Tree Protocol runs STP per VLAN base, providing Layer 2 load sharing on redundant links up to 64 instances.

Hardware Features

Items	TSW2828G-PF10
PORT	10/100/1000M BASE-T RJ45 ports	24
	1G SFP uplink ports	4
	Console RJ45 ports	1
	PoE Port	24
	PoE	802.3af/at
Performance	Flash memory	32MB
	DDR3 capacity	256MB
	Switching capacity	56Gbps
	MAC address table size	8K
	ARP table size	1K
	Jumbo frames	10KB
	Auto-negotiation	Yes
	Auto-MDI/MDIX	Yes
Certification	Input range	100-240VAC 50-60Hz
	System power	450W
	Rack Space	19"
	Dimension (W x D x H) cm	44 x 26 x 4.4
Environmental	Operating Temperature	0º to 45ºC
	Storage Temperature	-40º to 70ºC
	Operating Humidity  (non-condensing)	10% to 90%
	Storage Humidity    (non-condensing)	10% to 90%
	Environmental Regulation Compliance: WEEE	Yes
	Environmental Regulation Compliance: RoHS	Yes
	FCC Class A	Yes
	CE	Yes
	KC	Yes
	Safety Compliance: CB	Yes
	Safety Compliance: UL	Yes

Software Features

L2 Features
Tri-speed (10/100/1000BASE-T) copper interfaces
Auto-negotiation for port speed and duplex mode
Auto MDI/MDI-X
SFP fiber interface
1G BASE-X
Transceivers
current/rx-power/temperature/tx-power
voltage/high-low alarm and warning
Digital Diagnostic Monitoring (DDM)
Flow Control
IEEE 802.3x for full duplex mode
Back-Pressure for half duplex mode
Jumbo frames: 10 KB
Broadcast/Multicast/ Unknown Unicast Storm Control
Link aggregation
Static link aggregation
802.3ad with LACP
Unicast/Multicast load balance over trunk port
Spanning Tree Protocol
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
BPDU Guard
BPDU filtering
Root Guard
BPDU transparent
Loopback detection
VLANs
Supports 4K VLAN
Port-based VLAN
IEEE 802.1Q VLAN
GVRP (256 VLAN)
IEEE 802.1v Protocol-based VLAN
IP Subnet-based VLAN
MAC-based VLAN
Voice VLAN
Multicast VLAN+
QinQ
IGMP V1V2V3
IGMP Snooping
IGMP Proxy
IGMP snooping
MVR
MLD
MLD V1V2
MLD snooping
Port mirroring
Port security
IP Source Guard
Dynamic Arp Inspection
ERPS
OAM
UDLD
Cable-diagnostics
Qos Features
Scheduling for priority queues
Traffic Classification (802.1p/ToS/port/DiffServ)
Marking / Remarking
SP, WRR, SP+WRR
Traffic Shaping
rate-limit on port ingress
rate-limit on port egress
8 queues/port of Priority Queues 
Security
AAA
802.1X
RADIUS / TACACS+
Set source IP address
Radius fallback
Port authentication
MAC Authentication bypass
Multi user authentication 
Guest Vlan supported
SSH V2.0
DHCP Snooping
Option 82
IP Source guard
DoS Protection
ACL
L3/L4 
Statistics
VLAN ACL
ACL log (deny or permit)
IPv4/IPv6 ACL
IPv6
IPv4/IPv6 Dual Protocol Stack
IPv6 ACL ingress 
IPv6 DHCP

POE
PoE management

Management
Switch Management
CLI via console port or Telnet
Web management
SNMP v1, v2c, v3
Firmware & Configuration:
Firmware upgrade v
Configuration file upload/download 
RMON (groups 1, 2, 3 and 9)
MIB II
DHCP
Client
Relay
NTP
FTP/SFTP/TFTP client
Syslog
Supports LLDP / LLDP-MED
Ping
Traceroute